What this review covers
This review looks at the nozzle pack size, adjustable arc range, 12 to 15 foot spray distance, included screens, and fit for compatible spray-head service.
Shop Rain Bird HEVAN155PK High-Efficiency Spray Nozzle 5-Pack
These are the current affiliate destinations configured for this product.
- Amazon opens the Rain Bird HEVAN155PK five-pack product page.
The good
- The five-pack gives a small service kit several matching replacement nozzles.
- Adjustable arc control supports corners, curves, strips, and bed edges.
- The 12 to 15 foot spray distance suits many small spray-head zones.
The tradeoffs
- Existing head type and zone pressure should be checked before nozzle changes.
- Nozzles need careful flushing when sand or grit reaches the screen.
A nozzle refill for compatible spray heads
The Rain Bird HEVAN155PK is a five-pack of adjustable spray nozzles for compatible sprinkler heads. Each nozzle is made for a 12 to 15 foot spray distance and a 0 to 360 degree adjustable arc.
That gives a service shelf a small refill set for corners, curved lawn edges, and bed borders where the spray shape needs a fresh adjustment.
Arc adjustment belongs in the open
Nozzle adjustment reads clearly when the zone is visible and marked. Pull the stem up, set the nozzle, run the zone briefly, and watch where water lands.
Catch cups, flags, and short notes give the adjustment a clear record. Write the head location, arc, and run time while the checked area is still fresh in mind.
Screens need clean handling
The nozzle pack includes small screens. Those screens belong in the service routine because grit can change the spray or interrupt a head that usually runs cleanly.
Keep the screen and nozzle away from loose soil during installation. If a head sprays unevenly after service, shut the zone off, lift the stem, and inspect the screen before changing the layout.
Good match
Choose this pack for compatible spray-head zones that need adjustable nozzles with 12 to 15 foot reach.
What to know
Check sprinkler-body compatibility, thread condition, pressure, and spacing before swapping nozzles. Keep the removed pieces in a labeled bag until the zone has run cleanly.